Spiking the Mafate WP
So I decided to spike my Hoka One One Mafate WP. First of all I posted on their Facebook wall, asking if it would be okay, since I have no clue what the internal structure is, and I didn’t want to run into any air pockets. They replied quickly and said it would be fine. I went to a few stores trying to find #6 x 3/8 hex head sheet metal screws. Finally at the Ace Hardware in Silverthorne, CO, I found a box and got it. I charged up my drill and went to work. First you clean and mark the sole. You want to put in about 8 total screws, maybe more, balanced around the ball of the foot, and some on the heel and outside heel area. I marked mine on the larger lugs, though I don’t know if it matters too much.
I used a 1/16″ drill bit chucked way in, so that only about 1/2″ was sticking out, and drilled on the marks. Then I switched to a 3/8″ hex bit and sunk the screws until they felt tight. I set the drill clutch to #3, but it never clicked, so I don’t know if it would just keep stripping out the hole if you kept going – be careful.
Running Below Freezing pt 2
Today (blogging time) I had a chance to test them on a road I usually run a bit in the winter, so I could get a feel for them. Keystone Gulch Road connects a side road from Mountain House Base to North Peak and Outback Base at Keystone Resort. Snowmobiles, logging trucks, snowcats use the road regularly for work and rescue, and a variety of runners, snowshoers, pole hikers, and skiers use the road for training. The surface varies from gravel/snow/slush mixed, to hard ice, chopped ice, and soft and firm packed snow.
Accuweather said it was 20 with a windchill of 10, and I figured I was pretty warm last time at 10, so I put on some Pearl Izumi windblocker tights, an Under Armour coldgear zip t-neck and boxer briefs, a Mountain Hardwear Superpower Hoodie, A TNF running beanie (discontinued model), and my First Ascent windpro gloves. On my feet I had the usual Injinji liners, and Smartwool PHD compression kneesocks. I decided to forego my TNF Better Than Naked wind jacket.
I put the shoes on at the door, so I wouldn’t scratch my floors, and then went out and did a warmup walk while waiting for the Garmin 305 to get a satellite lock. The sound of clicking on the pavement was a bit odd (even over my Kittie playlist), and I purposefully walked on some slicker ice sections to test it out, and had really good connection to it. Felt stable. I started the Garmin at the mouth of Keystone Gulch Road, and ran uphill for 3.04 miles to the base of North Peak area at Keystone.
It was dang cold. I never really got warm. I kept the Superpower hood on almost the entire run. I was a bit slower than previously, but that might be because of my testing the modified Warrior Diet, or the altitude (9600′) getting me a bit more this trip, a bad night sleep – who knows? As far as dress goes, I did not get at all sweaty except for a few spots on my beanie, but then again, I did not ever feel warm. I think a windshell would be an absolute necessity this cold. The gloves were too cold, the Windpro was letting enough air in to keep me chilled. Perhaps something like Gore Windblocker would be better. I’ll dig around in my gloves to see what I have for next time.
Except for the deep looser snow (I did roll my ankle once – something people who fear Hoka shoes mention on the net a lot), the shoes ran quite well. I was pretty happy with them. I think I might add a couple screws to the midfoot area, since the Mafate seems to have a bit of rocker there. If you like the Hoka, and like to run in the winter, and might encounter firm snow or ice, I highly recommend you consider this relatively cheap and quick solution.
Video above is primarily to demonstrate the “clicking sound” on ice. 10:00 pace on very slippery hard packed snow.